Activated Alumina 14x28 Mesh (Aluminum Oxide)
Activated Alumina
pH :7–9 (in suspension)
Activated Alumina also known as aluminum oxide is designed for a range of general filtration and dewaxing when extracting plant resins. This granular media is coarse and has high surface area.
Activated alumina in extraction is primarily used to remove water during the butane extraction process. This particular Activated Alumina is pH Neural (7) making it an excellent choice for purification. Without a pH bias you can filter across a broad spectrum of applications and expect consistent performance.
Activated alumina is an effective desiccant for drying gasses and liquids. Activated alumina also removes impurities like fluoride, arsenic, soaps and acids.
NSF 61 certified & Made in USA, Purity: 100%. Shelf life 5 Years.
Activated Alumina SDS Sheet
Activated Alumina Technical Data Sheet
Key Uses:
- Removal of water, acids, and polar compounds from hydrocarbons and solvents.
- Porous, stable carrier for petrochemical and refining catalysts
- High porosity improves diffusion rates while high surface area.
- NSF 61 Certified: Guaranteed the product is free of harmful chemicals, and can be used in systems that humans come into contact consuming. Lot certificates can be available per request.
| Typical Properties | ||
| Bulk Density | lbₘ/ft³ | 40 |
| Loss on Ignition wt% | wt% | ≤7.5 |
| Particle Size | µm | 300-850 |
| Particle Size | *50 mesh | 20 |
| Surface Area | m²/g | 300 |
| Aluminum Oxide (Al₂O₃) Content | wt% | 99-100 |
| Iron Oxide (Fe₂O₃) Content | wt% | ≤0.014 |
| Sodium Oxide (Na₂O) Content | wt% | ≤0.6 |
| Silicon Dioxide (SiO₂) Content | wt% | 0-0.01 |
| CAS# 1344-28-1 | ||
Storage
- Store containers/packaging in a dry, covered location protected from the ambient environment.
- Remove from direct exposure to sunlight and rain.
- Do not subject material to temperatures exceeding 450°F/230°C while in storage.
- Once the material is loaded into the vessel, a thorough nitrogen purge is recommended to remove excessive free moisture.
- Desiccant products intended for regenerative service will
require a complete thermal regeneration cycle (in TSA service) or several pressure
swing cycles (in PSA service) before full activity is restored.
Note: Container style and color may vary. Product is sold by weight which may result in container not being full.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Activated Alumina
pH :7–9 (in suspension)
Activated Alumina also known as aluminum oxide is designed for a range of general filtration and dewaxing when extracting plant resins. This granular media is coarse and has high surface area.
Activated alumina in extraction is primarily used to remove water during the butane extraction process. This particular Activated Alumina is pH Neural (7) making it an excellent choice for purification. Without a pH bias you can filter across a broad spectrum of applications and expect consistent performance.
Activated alumina is an effective desiccant for drying gasses and liquids. Activated alumina also removes impurities like fluoride, arsenic, soaps and acids.
NSF 61 certified & Made in USA, Purity: 100%. Shelf life 5 Years.
Activated Alumina SDS Sheet
Activated Alumina Technical Data Sheet
Key Uses:
- Removal of water, acids, and polar compounds from hydrocarbons and solvents.
- Porous, stable carrier for petrochemical and refining catalysts
- High porosity improves diffusion rates while high surface area.
- NSF 61 Certified: Guaranteed the product is free of harmful chemicals, and can be used in systems that humans come into contact consuming. Lot certificates can be available per request.
| Typical Properties | ||
| Bulk Density | lbₘ/ft³ | 40 |
| Loss on Ignition wt% | wt% | ≤7.5 |
| Particle Size | µm | 300-850 |
| Particle Size | *50 mesh | 20 |
| Surface Area | m²/g | 300 |
| Aluminum Oxide (Al₂O₃) Content | wt% | 99-100 |
| Iron Oxide (Fe₂O₃) Content | wt% | ≤0.014 |
| Sodium Oxide (Na₂O) Content | wt% | ≤0.6 |
| Silicon Dioxide (SiO₂) Content | wt% | 0-0.01 |
| CAS# 1344-28-1 | ||
Storage
- Store containers/packaging in a dry, covered location protected from the ambient environment.
- Remove from direct exposure to sunlight and rain.
- Do not subject material to temperatures exceeding 450°F/230°C while in storage.
- Once the material is loaded into the vessel, a thorough nitrogen purge is recommended to remove excessive free moisture.
- Desiccant products intended for regenerative service will
require a complete thermal regeneration cycle (in TSA service) or several pressure
swing cycles (in PSA service) before full activity is restored.
Note: Container style and color may vary. Product is sold by weight which may result in container not being full.
